PVA.c Dispersion
PVA.c (polyvinyl acetate) dispersions are water-based wood adhesives. They are applied to one surface, joined within the open time and pressed; the bond forms as the water carrier leaves. They dry to a clear film.
The grades are classified by water resistance according to DIN EN 204: D2 for dry interiors, D3 for interiors with frequent short-term exposure to water or high humidity, D4 for long-term water contact. In the a-tack range 2400 and 2500 are D2, 2550 is D3, and 2700 is D3, reaching D4 with 5% hardener. The TDS documents specify a wood moisture content of 8–12% and consumption of 100–150 g/m² for natural wood.
Applications
Frame / wood assembly
Assembly of solid wood, MDF and particleboard parts in furniture frames, door frames and stairs.
- 2400 — D2, Medium viscosity, Dries to a clear, smooth film
- 2500 — D2, Higher viscosity and faster drying than 2400, Roller application
- 2550 — D3 (DIN EN 204), Fast drying, Short press time
Doors / windows / stairs / finger joint / lamination
Wooden windows, doors, stairs, finger joints and lamination where water and heat resistance are required.
- 2700 — Fastest drying (18–25 min), Hot press (up to 80 °C), Finger joint
Products in this family
- 2400 · PVA/C D2 Assembly — Eco
- 2500 · PVA/C D2 Assembly — Universal
- 2550 · PVA/C D3 Assembly
- 2600 · PVA D3/D4
- 2700 · PVA/C D3-D4
Find the right product for your line with the adhesive selector
Frequently asked questions
What do D2, D3 and D4 mean?
DIN EN 204 classifies the water and moisture resistance of bonded wood joints. D2 is for dry interior furniture; D3 for interiors with frequent short-term water or high humidity, and exteriors not directly exposed to weather; D4 for long-term water contact indoors and outdoors with a suitable surface coating. In the a-tack range 2400/2500 are D2, 2550 is D3, 2700 is D3 (D4 with hardener).
How is D4 achieved?
2700 is D3 according to DIN EN 204 and meets D4 when 5% hardener is added. The TDS cites the IFT Rosenheim EN 14257:2019-09 test. 2700 is intended for wooden windows, doors, stairs and finger joints that require water and heat resistance.
Which PVA for hot pressing?
2700 has an application temperature of 18–80 °C in its TDS and is suitable for hot pressing. With a drying time of 18–25 min (20–23 °C) it is the fastest in the range.
How long does PVA glue take to dry?
Drying times in the TDS documents (20–23 °C): 2400 30–40 min, 2500 25–35 min, 2550 25–30 min, 2700 18–25 min. Times vary with the amount applied, wood moisture and ambient temperature.
How much adhesive, and what wood moisture?
According to the TDS, consumption for natural wood is 100–150 g/m² and wood moisture content should be 8–12%. Application, ambient and substrate temperature should be 18–30 °C. Apply with a wide-surface glue spreader or hand roller.