PUR Hot Melt

PUR hot melt is a one-component reactive polyurethane adhesive that cures chemically with moisture. It is applied molten; it builds initial tack as it cools, then reacts with moisture in the substrate and the air to form a permanent bond. Once cured it does not re-melt, which makes it more resistant to heat and humidity than thermoplastic hot melts.

The a-tack PUR range covers interior and exterior profile wrapping, PUR edge banding, flat lamination, high gloss and super matt surfaces, sandwich panels and IMO-certified marine applications. In the Aktif TDS documents chemical cure takes about 7 days depending on humidity; where heat resistance is specified, the range is -35 to +150 °C.

Applications

Interior profile wrapping

Wrapping MDF, wood-based and WPC frames, architraves and profiles with foil or natural veneer for interior use.

Lamination / sandwich panel

Laminating decorative surfaces onto boards on flat lamination lines, and sandwich panel production.

Lamination / sandwich panel / marine

Panel lamination for ship and yacht interiors where IMO fire certification is required.

Exterior profile wrapping

Covering PVC, aluminium and composite window and door profiles with exterior-grade foils.

PUR edge banding

Edge banding with a thin glue line and water and heat resistance, for kitchen, bathroom and wet-area furniture.

Maintenance / roller cleaning

Removing carbonised residue from hot melt applicator rollers.

Products in this family

Find the right product for your line with the adhesive selector

Frequently asked questions

What is the difference between PUR and EVA hot melt?

EVA is thermoplastic and softens again when heated. PUR reacts chemically with moisture and does not re-melt once cured. In the Aktif TDS documents, PUR products with a specified heat resistance (e.g. 1270-65, 1707-46) are rated from -35 to +150 °C. PUR is preferred for edge banding, profile and lamination work that must withstand heat and moisture.

How long does PUR adhesive take to cure fully?

Curing progresses with moisture in the air and the substrate. In the Aktif TDS documents chemical cure is about 7 days for 1270-65, 1270-62, 1425-05 and 1707-46; reaction takes 1–7 days for 1363-30, 1363-31 and 1363-21, 2–5 days for 1363-45 and about 1–3 days for 1435-10. Low humidity slows curing. Final strength tests should be done after curing is complete.

What equipment is needed for PUR hot melt?

A moisture-sealed PUR melting system is required. The TDS documents specify 20 kg PUR melters and 20–200 kg drum melters; 2.5 kg and 20 kg melters are also used for edge banding. Because the adhesive reacts with moisture in the air, the melter must stay closed and the adhesive should not be left exposed when the machine is stopped.

Interior profile wrapping: 1270-65 or 1270-62?

Both wrap wood-based, WPC and pre-treated aluminium profiles with primed PVC, CPL, natural veneer and thin paper foil. The difference is open time: 1270-65 has 18 ± 5 s and a line speed of 10–60 m/min, giving the foil time to settle on complex profiles. 1270-62 has 9 ± 3 s and 15–60 m/min, suited to high-speed lines and high memory effect CPL.

Which PUR is used for exterior profile wrapping?

1425-05 is designed for exterior profile wrapping: open time 3–6 min, line speed 6–15 m/min, application 110–140 °C, heat resistance -35 to +150 °C. RAL-GZ 716 tests required for window profiles are carried out on the complete system of profile, foil and adhesive; request a sample for your own combination.

Which product for high gloss and super matt lamination?

1363-45 is designed for surface quality on high gloss and super matt decorative surfaces: open time 90 ± 30 s, application 110–120 °C. For a wide substrate range such as metal, PMMA, PC, ABS and aluminium/steel sheet, 1370-80 is used (open time 3–6 min, low viscosity); according to the TDS, one of the bonded materials must be permeable.

Which PUR for marine and IMO-certified applications?

1363-30 is certified under IMO Res. MSC.307(88) – FTP Code 2010 Annex 1 Part 5; the certificate limits consumption to a maximum of 102 g/m². 1363-31 is the non-certified version with the same technical values.

How are rollers cleaned on a PUR line?

6322-03 is a granular roller cleaner: it is applied by hand at roller working temperature (110–150 °C) and the carbonised residue is scraped off. It is used for periodic maintenance on flat lamination lines.