Membrane Press
Membrane press adhesives are water-based polyester-polyurethane dispersions. They are sprayed onto 3D-milled or flat MDF; once the water has evaporated the parts are placed in a membrane or vacuum press. Heat activates the adhesive and the PVC or thermoplastic foil takes the shape of the front or panel.
In the a-tack membrane range 3300 is the standard 1K grade, 3400 the low-viscosity 1K grade, and 3500 is used as 1K or as 2K with 5% hardener. The TDS documents specify a machine setting of 110–130 °C, reactivation from 55 °C and drying of 25–35 min (20–23 °C); consumption is 40–80 g/m² on flat and 80–120 g/m² on milled surfaces.
Applications
Membrane press
Covering 3D-milled MDF fronts and panels with PVC and thermoplastic foils in membrane or vacuum presses.
- 3300 — 1K, Transparent film, Low consumption
- 3400 — 1K, Low viscosity, Even spraying
- 3500 — 1K/2K, High heat resistance with 5% hardener, Transparent film
Products in this family
Find the right product for your line with the adhesive selector
Frequently asked questions
How much membrane press adhesive should be applied?
According to the TDS, consumption is 40–80 g/m² on flat surfaces and 80–120 g/m² on milled surfaces. Apply with a 1.1 mm tank system and a 1.8 mm spray gun.
When to press, and at what machine temperature?
The adhesive dries in 25–35 minutes at 20–23 °C; the parts are pressed once dry. The machine setting is 110–130 °C; the adhesive reactivates from 55 °C.
Should 1K or 2K be used?
According to the TDS, 3500 gives high heat resistance when used as 2K with 5% hardener; this advantage does not apply to 1K use. The mixture must be used within 8 hours after adding hardener. 3300 and 3400 are 1K grades.
What is the difference between 3300 and 3400?
Viscosity: 3300 is 1,250 ± 350 mPa·s and 3400 is 950 ± 350 mPa·s (Brookfield, 20–23 °C). The lower-viscosity 3400 sprays more evenly.
How should membrane press adhesive be stored?
According to the 3300 and 3400 TDS, do not ship or store below +5 °C. The 3300 TDS notes that equipment cleans easily with water before the adhesive dries.